[Elecraft] K3S with more than one device on the Band Data signals

[Ionut Pitu]

You could use a line buffer.Check this page http://www.kotarov.com/projects/k3-and-acom-2s1This is an adapter for acom 2S1 switch, but he also added a buffer  to drive more then one decoder, just use that part :-)BobYO8RNI

      From: NOEL POULIN <ve2fww at globetrotter.net>
 To: Elecraft at mailman.qth.net 
 Sent: Saturday, March 11, 2017 12:38 AM
 Subject: [Elecraft] K3S with more than one device on the Band Data signals
   
Hi to all,
I am on the way to connect a Bandpasser2 (band data mode) on a K3s.
Later I would like also to connect a band decoder on the same radio to 
switch coaxial stubs.
I wonder if the K3s can handle more than one device connected to the 
Band Data signals.
I suppose that Elecraft band output is probably designed to drive one 
decoder and this decoder is designed with current maximums for each port.
I would appreciate comments and good tips about that fact...
Thanks
Noel
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to pituionut at yahoo.com