[Elecraft] K3S with more than one device on the Band Data signals

[Bob Wilson, N6TV]

Using band data mode, I've simultaneously driven both the KPA500 and a Top
Ten Devices band decoder from a single K3 with no problems.

73,
Bob, N6TV

On Fri, Mar 10, 2017 at 2:38 PM, NOEL POULIN <ve2fww at globetrotter.net>
wrote:

> Hi to all,
> I am on the way to connect a Bandpasser2 (band data mode) on a K3s.
> Later I would like also to connect a band decoder on the same radio to
> switch coaxial stubs.
> I wonder if the K3s can handle more than one device connected to the Band
> Data signals.
> I suppose that Elecraft band output is probably designed to drive one
> decoder and this decoder is designed with current maximums for each port.
> I would appreciate comments and good tips about that fact...
> Thanks
> Noel
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6tv at arrl.net
>