[Elecraft] [K3] AGC White Paper

[Don Wilhelm]

Brian,

The effect of reducing the RF Gain is *about* the same as increasing the 
AGC threshold.  Not quite, but that is a simplistic way of looking at it.

73,
Don W3FPR

On 3/6/2017 6:13 PM, Brian Hunt wrote:
> I noticed that your AGC curves were made with the RF gain full max. I rarely operate that way. I usually turn the RF gain down to where the noise peaks are barely kicking the S-meter. By doing so, is it fair to say I'm moving the curve to the right?  I.e, a higher signal amplitude before the AGC kicks in for a given THR number?