[Elecraft] [K3] AGC White Paper

[Brian Hunt]

I noticed that your AGC curves were made with the RF gain full max. I rarely operate that way. I usually turn the RF gain down to where the noise peaks are barely kicking the S-meter. By doing so, is it fair to say I'm moving the curve to the right?  I.e, a higher signal amplitude before the AGC kicks in for a given THR number?

Nice presentation Al. Thanks. 

73,
Brian, K0DTJ

> On Mar 5, 2017, at 21:50, Al Lorona <alorona at sbcglobal.net> wrote:
> 
> I spent a little bit of time this weekend and put together yet another K3 AGC (YAKA) "white paper" to put some measurements and discussion of the results down in the hope that others may benefit.