[Elecraft] ALC on RTTY Again

[Don Wilhelm]

Leroy,

Have you considered that you may have a problem with your computer and 
the soundcard (Signalink) output?

There is always a tendency to blame the transceiver, but the fact that 
you do not have the proper number of ALC bars indicates that there may 
be a problem with the volume of audio being fed to the K3.

Look at the "speaker" output level for the Signalink on your computer. 
The slider should be set to at least 75% of full.

73,
Don W3FPR

On 3/6/2017 4:10 PM, Leroy Buller wrote:
> I am installing a new computer system here and have had to install my
> Signalink USB and MMTTY.  It seems to be working but there seems to be an
> issue with the K3.  This kind of showed up on my on XP machine in recent
> weeks.
>
> Problem.  There is not ALC no matter how hard a drive it with the mic gain
> control on the radio.  There was while I was testing, but then I got into a
> QSO and the alc indication on the K3 disappeared.