[Elecraft] K3S won't low power (5 watts) calibration error

Don Wilhelm donwilh at embarqmail.com
Mon Mar 6 06:55:26 EST 2017


Ted,

The KAT3 must be bypassed to run the TX Gain Calibration.  You need to 
have a dummy load that is 50 ohms up through 54MHz (SWR 1:1).

Contact Elecraft support before taking it in.  They will request an RSA 
number from sales.  Wait until you have received the RSA number and 
information before taking it in.

73,
Don W3FPR

On 3/6/2017 12:16 AM, Wp4cw via Elecraft wrote:
> Sorry for the bother Don,
>
> I'm 2 hours from Elecraft. I should be able to walk in my radio for repair. Ted
>
>
>
> In a message dated 03/05/17 20:44:55 Pacific Standard Time, ml-node+s365791n7627646h39 at n2.nabble.com writes:
> Is that "TX Test" instead of "text test"?
>
> You should not put the K3S into TX TEST mode when doing the TX Gain
> Calibration.  TX TEST is a condition where everything in transmit works
> *except* there is no RF output.  TX TEST is set ON/OFF by holding the
> right side of the MODE button.
>
> Use the TUNE button when doing the TX Gain Calibration manually.
>
> 73,
> Don W3FPR
>
> On 3/5/2017 11:18 PM, Wp4cw via Elecraft wrote:
>> No didn't work. When I hold tune , vfo b displays text test.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>
>
>
>
> If you reply to this email, your message will be added to the discussion below:
> http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641p7627646.html
> To unsubscribe from K3S won't low power (5 watts) calibration error, click here.
> NAML
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3S-won-t-low-power-5-watts-calibration-error-tp7627641p7627647.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>


More information about the Elecraft mailing list