[Elecraft] Afsk a

[Nr4c]

The KX3 never accepted paddles input to send RTTY using DATA sub-mode AFSK A. You must select sub-mode FSK D to use this feature. Read the manual on Data modes.  

Sent from my iPhone
...nr4c. bill


> On Mar 1, 2017, at 1:33 PM, "Martin at The-Wallers.net" <Martin at The-Wallers.net> wrote:
> 
> Hi,
> 
> Can you help me please? 
> 
> I was playing with data modes the other day and my kx3 was happily sending rtty in afsk a mode using the morse paddle. Today it no longer accepts input from the morse paddle in afsk mode but does in other data modes.
> 
> I have a feeling I've changed a setting somewhere but I don't know where?
> 
> Any advice greatly appreciated.
> 
> Martin
> G0PJO
> 
> 
> 
> Sent from my iPad
> 
>> On 28 Feb 2017, at 18:17, Bill Johnson <k9yeq at live.com> wrote:
>> 
>> Because?
>> 
>> Have a great day!
>> Bill J
>> K9YEQ
>> 
>> 
>> ________________________________
>> From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of Wes Stewart <wes_n7ws at triconet.org>
>> Sent: Tuesday, February 28, 2017 11:37:13 AM
>> To: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] 80 Meter Verticals
>> 
>> Ted,
>> 
>> You need to read W7XC's (SK) article in QST Mar 1990, pp 26-30
>> 
>> 
>>> On 2/27/2017 4:13 PM, Dauer, Edward wrote:
>>> A question that’s admittedly a bit OT – though if I need a pretext, the rig to be used is a K3 . . .
>>> 
>>> I have been reading through the usual texts about vertical antennas for 80 meters, to replace the half wave dipole I now have and the Vee I had but didn’t like.  But I have not yet found the answer to one question I am thinking about:  The advantages or disadvantages of an inverted L compared to other variations of the top-loaded vertical.
>>> 
>>> Assume a 40-foot ground-mounted vertical section made with wire running up a fiberglass mast.  There could be a remote tuner or balun at the base if it’s needed.  The top of the vertical section would be guyed with four lines more or less parallel to the earth extending from the top tip of the vertical section to four suitably located trees.  That physical configuration offers three kinds of options.
>>> 
>>> One is an inverted L.  One of the four guy lines would be a wire making the L and long enough to have the overall antenna resonate, with nonconductive line from there to the tree.  The other three guy lines would be nonconductive for their entire length.
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com