[Elecraft] "Hot" setup for Field Day with op headset, logger headphones, and speakers

[Peter Wollan]

Several years ago I got a little box that takes an audio input and has four
sockets for headphones, each with its own volume control -- needs 12v
power.  I think it's not available now, but Amazon has 5-way splitters for
cheap, not powered, and no volume control.  Look for "headphone splitter".

   Peter W0LLN

On Tue, Jun 27, 2017 at 5:32 PM, Mike Murray <w0agmike at gmail.com> wrote:

> Steve,
>
> How about using the phone jack on front panel for one, back panel for
> another and then set "SPKR+PH"  to yes if you want the gallery to hear?
>
> Mike W0AG
>
> On Tue, Jun 27, 2017 at 3:05 PM, Steve Wilson via Elecraft <
> elecraft at mailman.qth.net> wrote:
>
> > Hi all,
> > With Field Day behind us, and since our club runs mostly K3's, I thought
> > I'd ask if anyone had suggestions for the best way to configure the K3,
> use
> > adapters, audio distribution box of some sort, etc., to allow for a
> headset
> > for the operator, headphones for the logger, and speakers for the
> "gallery"
> > to hear.
> > Thanks, Steve  KO6L
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to w0agmike at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to peter.wollan at gmail.com
>