[Elecraft] k2 and kpa 100

[Don Wilhelm]

Christophe,

If your K2 serial number is 3000 or greater, those modifications do not 
have to be done at all, they are already present on the RF Board.

You do need to mount the headers at P3 and P6 and remove pin 4 from the 
10 pin header at Control Board P4.

Those changes may be made at any time.

I am confused about your question of "first tests step 2 of the KPA100 
with dialog and assembly in the K2"  I think we have a language barrier.
Please restate with reference to the page number in the manual.

Assembly, Part 1 (page 12) comes before the "Initial Tests" (page 22) 
and the PA transistors are not mounted.

Sorry, but my French is lacking.  I spent 15 months in France with the 
Army in 1963/4 but learned only enough words to buy what I needed or 
order a meal.

73,
Don W3FPR

On 6/26/2017 3:09 PM, Christophe F8ACF-56 via Elecraft wrote:
> Good evening to all ,
> The K2 modifications to put the KPA 100
> 
> Should they be made, before putting the KPA 100?
> 
> For the first tests step 2 of the KPA100 with dialogue and assembly in the K2, well step 3 or we have mounted the transistors of the final
> 
> Thank you in advance for your remarks
>   73 , Christophe F8ACF-56
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
>