[Elecraft] KX2 and Omnirig ...

[john mcleod]

Hey, great, thanks for the tip Bob. The K3 setting works perfectly well for
my needs. Thanks again !!!

John  N6RCD


On Sun, Jun 25, 2017 at 5:07 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> According to the Elecraft Programmer's Reference
> <http://www.elecraft.com/manual/K3S&K3&KX3&KX2%20Pgmrs%20Ref,%20G1.pdf>,
> "The KX3 and KX2 accept all K3
> commands, though some have no functional effect on the KX3/KX2 (*)".
>
> So, in OmniRig, select radio type Elecraft K3, and everything supported by
> OmniRig should work fine on the KX3.
>
> Try the free OmniRig client <http://dxatlas.com/OmniRig/Files/Client.zip>
> to test all the supported functions. See also the OmniRig Tester's Guide
> <http://dxatlas.com/omnirig/BetaTest.txt>.
>
> 73,
> Bob, N6TV
>
> On Fri, Jun 23, 2017 at 9:11 AM, john mcleod <jaanmcleod at gmail.com> wrote:
>
>> Has anybody had any experience with coming up with an omnirig ini file for
>> the KX2 ? Failing that, any pointers to how to come up with a new file ?
>> I've read the Afreet readme files, but am still no wiser as to how to go
>> about this.
>>
>> Thanks !!
>>
>> John  N6RCD
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n6tv at arrl.net
>>
>
>