[Elecraft] K3 - No Power Out, Error Message "ERR PL-1"

[Don Wilhelm]

Ed,

Turn to page 70 in the K3 manual and try the correction steps listed for 
the ERR PL-1 error.

If that does not correct it, contact K3support for further steps.

73,
Don W3FPR

On 6/21/2017 8:53 AM, Ed Gilliland wrote:
> No power out
> 
> 5W calibration fails
> 
> The error message "ERR PL-1" appears briefly when I change bands.
>