[Elecraft] K3S Noise reduction Test
tomb18
tomb18 at videotron.ca
Wed Jun 21 00:45:43 EDT 2017
Just a note. This is with a small amplified vertical receive antenna, the ncc1 and all fed through the k3 Rx loop. It's wwv, and the whole thing is switched in at the end of the video. 25dBm reduction in the noise. It's also really useful for eliminating acting one signal on top of the other. For example Am broadcast dxing... I can get rid of a strong am broadcast on top of a weak one. Now if only this could be automated and built in to the radio...
Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: tomb18 <tomb18 at videotron.ca> Date: 2017-06-21 12:37 AM (GMT-05:00) To: Dave Cole <dave at nk7z.net>, elecraft at mailman.qth.net Subject: Re: [Elecraft] K3S Noise reduction Test
I think the ncc1 is under rated. Here is an example of what it can do. I was plagued by a neighbour with outdoor high intensity lights which he insisted on leaving on during the day.. It was either this or blasting his house with 2.4ghz noise whenever his lights were on during the day... It's not the best video but it shows what you can achieve... https://va2fsq.com/wp-content/uploads/2013-Jan-15-20-43-43.avi 73 Tom
Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Dave Cole <dave at nk7z.net> Date: 2017-06-21 12:04 AM (GMT-05:00) To: elecraft at mailman.qth.net Subject: Re: [Elecraft] K3S Noise reduction Test
Don,
Thanks for the info, but as John said, I was suggesting a noise
canceling setup... I was not clear enough, my error.
73s and thanks,
Dave
NK7Z
http://www.nk7z.net
On 06/20/2017 06:39 PM, john at kk9a.com wrote:
> But that is not what NK7Z is suggesting. He suggested a built in noise
> canceller which would be awesome!
>
> John KK9A
>
> Don Wilhelm wrote
> Tue Jun 20 19:51:45 EDT 2017
>
> Dave,
>
> The K3S has a receive antenna connection so you can do exactly that.
> The low noise antenna is up to the operator to provide.
> If you have the KRX3 option installed, diversity reception may also help.
>
> 73,
> Don W3FPR
>
> On 6/20/2017 6:21 PM, Dave Cole wrote:
>> What would be really nice would be to have a separate antenna designed
>> for noise reception, and the ability to phase shift it from the normal
>> antenna, allowing for noise cancellation...
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca
More information about the Elecraft
mailing list