[Elecraft] KXPD2 contact post screws...

[Don Wilhelm]

Tom,

I do not know, but I would expect the screw size to be either 4-40 or if 
smaller, 2-56.  Elecraft uses US sized screws.

73,
Don W3FPR

On 6/19/2017 11:42 AM, Tom Francis, W1TEF wrote:

> It is what it is - what I need is to size the screws that hold the 
> contact posts in place
> so I can experiment with longer screws.
> 
> Anybody happen to know what the screw size is?