[Elecraft] Using Heil Pro Set Elite boom mic on K3.. what adapter is required?
Jim Rhodes
jimk0xu at gmail.com
Sun Jun 18 22:06:32 EDT 2017
Hmm, mine has a 1/4 inch stereo plug for phones.
On Sun, Jun 18, 2017 at 8:39 PM, Dave Fugleberg <dave.w0zf at gmail.com> wrote:
> The Heil pro sets have a 1/8 inch stereo plug for the phones and a1/8
> inch mono plug for the mic. Those will plug right into the back of the K3
> without an adapter. If you prefer using the front panel mic connector,
> you'll need the Heil AD-1-K adapter.
> In either case, don't forget to set the menu selection for which mic (front
> or rear) you want to use.
>
> On Sun, Jun 18, 2017 at 7:55 PM mjpilgrim <mpilgrim at bellsouth.net> wrote:
>
> > I am soon to be the owner of a used K3. I presently use a Heil Pro Set
> > Elite
> > boom mic for my IC-7600 and want to know if anyone here has used this mic
> > on
> > a K3, and if so, what adapter did you use to connect to the round 8-pin
> > mic
> > input on the K3? I'd like to hear your ideas. Thanks
> > Mike, K5MP
> > Boca Raton, Fl
> >
> >
> >
> > --
> > View this message in context:
> > http://elecraft.365791.n2.nabble.com/Using-Heil-Pro-Set-
> Elite-boom-mic-on-K3-what-adapter-is-required-tp7631866.html
> > Sent from the Elecraft mailing list archive at Nabble.com.
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to dave.w0zf at gmail.com
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com
>
--
Jim K0XU
jim at rhodesend.net
More information about the Elecraft
mailing list