[Elecraft] A question about using the K3S with KPA500 on full break-in

[Cady, Fred]

Hi Steve,

Maybe the K-line_intro_guide.pdf available at http://www.ke7x.com/home/k-line-introduction-and-set-up-guide might help.  Although written for the K3, there isn't anything different you need to do for the K3S.

73,

Fred KE7X


For all KE7X Elecraft books, see www.elecraft.com<http://www.elecraft.com>



________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Steve Ireland <vk6vz at arach.net.au>
Sent: Friday, June 16, 2017 8:03 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] A question about using the K3S with KPA500 on full break-in

G’day

A good friend of mine for who English is not his first language is wanting to run full-break in with his K3S and KPA500. The KPA500 manual appears not to have a section in it on doing full break-in with the K3S.

Please can someone on the list let me know what interconnections/cables are required between the two transceivers to do this and whether there are any menu selections that need to be made, so I can pass this information onto him.

Thank you!

Vy 73

Steve, VK6VZ/G3ZZD

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu