[Elecraft] mic -David Clark aviation headsets

[Fred Jensen]

Thanks to all for the all the info.  I have concluded that, should I 
ever find the DC headset in the garage, I'm going to leave it there.  I 
currently use a Heil Proset I got from Elecraft.  I get very good 
reports when I'm on SSB, which is only rarely, thanks in part to my K3's 
TXEQ.  It's not the most comfortable, possibly because I've compressed 
the pads with use. The David Clark probably is in the same condition 
given its use. When I decide I need a new headset, I'll probably check 
here, and if they're still made, get the CM-500 and try it.

Again, thanks for all the info

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 6/12/17 12:50 PM, Dave B via Elecraft wrote:
> Some of those use what's called a "Bantam" jack plug for one function
> (Mic or Can's, I forget which.)  Was very common in landline telecoms
> and broadcast circles some time back.
>
> Best bet, is to look on the David Clark website.  They are also quite
> helpful if you contact them too.
> http://www.davidclarkcompany.com/
> http://www.davidclarkcompany.com/aviation/customer-service.php
>
> But be quick, they have a company shutdown July 3rd to 7th (Cant think why!)
>
> 73.
>
> Dave G0WBX.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6dgw at foothill.net
>