[Elecraft] KX3/P3 external power source

[Matt Zilmer]

FWIW, I'm using a Turnigy 7.2AN, 4S LiPo for the KX3 and KX2.  Works 
fine, though at full charge it's a little high on the voltage.

73,

matt W6NIA


On 6/7/2017 10:29 AM, Matthew MacRoberts wrote:
> I need to work up a reliable external power source for my KX3 and P3. I also have RC aircraft and cars… So a LiPo or LiFe battery is an easy solution for me.
>
> The battery would offer substantial weight savings and I already have the chargers and other equipment necessary to build the connections.
>
> Is there anything that I need to be aware of? Would a 4S 14.8V 5200mAh 50C be workable?
>
> What other advice would you have?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mzilmer at roadrunner.com

-- 
"A delay is better than a disaster."
-- unknown

Matt Zilmer, W6NIA
[Shiraz]