[Elecraft] Using the K3s with a Tokyo Hy-Power HL-1.5KFX amp.

[M. George]

A quick google search will return this link for the manual in pdf format:

http://www.radiomanual.info/schemi/ACC_PA/Tokyo_Hy-power_HL-1.5KFX_user.pdf

Page 14 has the details on making a cable for band data / switching.  Setup
a cable for the Kenwood and match the details for the ACC port on the K3.
I suspect you should be good to go.  I don't see any cable making 'rocket
science' that would be required. :)

Max NG7M

On Mon, Jun 5, 2017 at 8:33 PM, Clay Autery <cautery at montac.com> wrote:

> Send me a manual in PDF for your amp and I'll take a look....  I've been
> making custom cables for 20+ years....
>
> ______________________
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
>
> On 6/5/2017 5:59 PM, Ron Manfredi wrote:
> > Is there a cable available to allow automatic band switching of this
> > amp from the K3s?    (Or advice on how to make one up.)   The amp and
> > rig work well together, but automatic band switching would be nice!
> > The only reference I have found online refers to adding pull up
> > resistors to the (older) K3 board. (KI03?)
> >
> > Thanks for any suggestions.
> >
> > Ron  WA2EIO.
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to cautery at montac.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.matthew.george at gmail.com
>



-- 
M. George