[Elecraft] P3 display issue.

[Fred Jensen]

It's leakage of an internal signal from the K3 [or maybe even the P3 but 
I doubt it] into your P3, most probably through the cabling.  It moves 
when you tune because it's coming from the radio. It's like some fairy 
tale or bad dream... you can chase it but you'll never ever catch it. [:-)

Could be a bad IF jumper cable, or possibly common mode on the serial 
cable(s).  A common mode choke on the serial cable at the P3 cured mine.

73,

Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn

On 6/4/2017 8:23 AM, Mike Weir wrote:
> Yesterday while on the radio I notice on my P3 screen a signal (so I thought) the band was basically dead other than this signal. As I tried to tune to it the signal would move. No matter how close I tried to get to the so called signal it kept the same distance from my VFO A tuning indication. I have seen this on other SDR setups but never on the P3 putting this out there for your input.
>
> Thanks
>
> Mike Weir
>
> VE3WDM
>