[Elecraft] PR6 Preamplifier Power Plug 'P1'?

[Jim Miller]

or a hobby shop that sells remote control accessories. this is typically
used to connect to servos.

jim ab3cv

On Sun, Jun 4, 2017 at 10:28 AM, Nr4c <nr4c at widomaker.com> wrote:

> Sorry. Don't have PR6. Disregard previous answer.
>
> This looks like a typical .1 center. Single row female header. Should find
> on Mouser, Digikey or eBay. Also try Amazon.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jun 3, 2017, at 10:22 PM, Jeffrey Maass <jmaass at k8nd.com> wrote:
> >
> > What is the manufacturer / type of the 'P1' plug required to provide
> power
> > to the PR6 preamplifier?
> >
> >
> >
> > I cannot find any note in the manual or in previous posts to this
> reflector.
> >
> >
> >
> > Thanks / 73,
> >
> > Jeff K8ND
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to nr4c at widomaker.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim at jtmiller.com
>