[Elecraft] K3 Display is Dated...

[Nr4c]

And the front panel would be the size of a 40 inch TV. 

Sent from my iPhone
...nr4c. bill


> On May 31, 2017, at 10:13 PM, Drew AF2Z <pubx1 at af2z.net> wrote:
> 
> I would like to have a front panel that is designed according to these two rules:
> 
> 1. Use physical controls only: buttons, knobs, switches. (Not a "smudge screen".)
> 
> 2. The state of every control should be obvious by its position, rotation, dial, or adjacent LEDs; or, the control should be located directly adjacent to a screen area where its state is displayed.
> 
> IOW, it is annoying to operate a control on one side of the panel and having to look half way across the panel to the other side to see what the state of that control is.
> 
> I think if those two rules were followed you'd have a really satisfying rig to operate.
> 
> 73,
> Drew
> AF2Z
> 
> 
>> On 05/30/17 17:36, ke9uw wrote:
>> I was wondering if the K3 display could be replaced by an updated display,
>> one that looks like the ones on the newest rigs from Japan. Could it be
>> displayed on the monitor connected to the svga on P3? Just wondering :)
>> -----
>> Chuck, KE9UW
>> --
>> View this message in context: http://elecraft.365791.n2.nabble.com/K3-Display-is-Dated-tp7631264.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to pubx1 at af2z.net
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com