[Elecraft] KAT-500 brain trust question

[Chris Tate - N6WM]

Don thanks for this, indeed this is the current solution.  Although it is rather obscure as far as indicators on the front panel.

I would like to convert this to a feature request, as It would be nice if the firmware supported, and there was another matrix in the KAT500 Utility that would permit a hard bypass with indicator on a per band basis.  Gives that warm fuzzy its doing exactly what you want..

E.g. qsy to 20m.. bypass light comes on..

Chris
N6WM

-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Chris Tate - N6WM
Sent: Sunday, July 30, 2017 1:31 PM
To: donwilh at embarqmail.com
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] KAT-500 brain trust question

Thanks Don I will take a look

Thanks
~C.

> On Jul 30, 2017, at 1:29 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Chris,
> 
> Yes, see page 17 of the KAT500 manual.  Easier for you to read it than for me to try to explain all of it.
> 
> 73,
> Don W3FPR
> 
>> On 7/30/2017 4:01 PM, Chris Tate - N6WM wrote:
>> Is there a way to put the KAT500 in bypass when on certain bands?  Use case is SteppIR on AN1 and auto tracking, and HQ antenna on ANT2 that requires tune adjustment and memories.  KAT500 is getting band/QRG telemetry via cat from radio.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to ctate at ewnetinc.com