[Elecraft] Query, KPA500 Remote Opns

[Chris Tate - N6WM]

As far as the SWR piece, I have found pairing a W2 wattmeter particularly useful with this configuration, that can also be set up in a client/server configuration when paired with a pc on the remote end.
________________________________________
From: elecraft-bounces at mailman.qth.net [elecraft-bounces at mailman.qth.net] on behalf of Chris Tate - N6WM [ctate at ewnetinc.com]
Sent: Friday, July 28, 2017 11:48 AM
To: Ken K6MR; k5aj at gmx.com; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Query, KPA500 Remote Opns

This will require some knowledge of vpn and/or port forwarding to handle remotely.

The new flex remote software does not use VPN and dynamically configures UPNP enabled routers, thus there will be a bit of additional tweaking and knowledge needed to accomplish this.

~Chris
N6WM
________________________________________
From: elecraft-bounces at mailman.qth.net [elecraft-bounces at mailman.qth.net] on behalf of Ken K6MR [k6mr at outlook.com]
Sent: Friday, July 28, 2017 11:06 AM
To: k5aj at gmx.com; elecraft at mailman.qth.net
Subject: Re: [Elecraft] Query, KPA500 Remote Opns

Yes. Use the Elecraft KPA500 remote software

http://www.elecraft.com/k2_remote.htm#k3remote

You can run it client/server if you have a PC on the remote end or use a serial or USB server.

Ken K6MR

From: k5aj at gmx.com<mailto:k5aj at gmx.com>
Sent: Friday, July 28, 2017 10:50
To: elecraft at mailman.qth.net<mailto:elecraft at mailman.qth.net>
Subject: [Elecraft] Query, KPA500 Remote Opns

Hello,
This is my 2nd attempt to get this into the digest.
Is there a way to remotely cause the KPA500 to switch
between OPERATE and STANDBY?

With the new Flex 2.0 Software, the entire flex
radio can be operated over IP.  Ultimately, there
ought to be a way to allow the KPA500 to switch Standby/Operate
over IP in tandem with the Flex SDR 2.0 software.

Next question, and this may be too hard to do.  Is there a
way for a remote operator to ascertain the KPA500's SWR/Pwr
remotely over IP, so I won't have to beam an IP camera to the
Elecraft front panel?

Thanks much,
Jack
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6mr at outlook.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ctate at ewnetinc.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ctate at ewnetinc.com