[Elecraft] Trying to get on FT-8 with my KX2

[Bill Frantz]

If Tommy is using a SignaLink, he will also have to set the 
transmit and receive level pots on the SignaLink. I have always 
set mine fully clockwise -- full on.

73 Bill AE6JV

On 7/22/17 at 1:38 PM, neilz at techie.com (Neil Zampella) wrote:

>Now you say you're not transmitting.   What is the MIC setting 
>on the rig?? If you're using the Signalink to control the audio 
>to the RIG, you should have the MIC set up around 20 to 25 for 
>now.    The WINDOWS speaker setting for the Signalink should be 
>at 100%, again since you're controlling the audio to the rig 
>via the signalink. You should then set the Tx POWER out on the 
>KX2 to what you want to use.   Unlike other radios, the 
>KX-series (and I believe the K series) Tx power out is set on 
>the rig.

-----------------------------------------------------------------------
Bill Frantz        | If the site is supported by  | Periwinkle
(408)356-8506      | ads, you are the product.    | 16345 
Englewood Ave
www.pwpconsult.com |                              | Los Gatos, 
CA 95032