[Elecraft] Idea for the P3

[Lynn W. Taylor, WB6UUT]

Look for "KVM over IP" and shop a bit.  Some are spendy, some not so much.

On 7/3/2017 1:53 PM, Bill Frantz wrote:
> Wayne has posted about using a device which sends VGA over IP to a 
> remote location to display the P3 VGA display remotely. That is 
> off-the-shelf hardware he got from, I think, Amazon.
> 
> 73 Bill AE6JV
> 
> On 7/3/17 at 1:38 PM, k6dgw at foothill.net (Fred Jensen) wrote:
> 
>> It would be a nice featurefor remote operators. I operate W7RN 
>> remotely from my home.  When my K3 is in TERM mode controlling the 
>> remote radio, my P3 sees the last frequency I was on locally +/- 10 
>> KHz [I usually leave it on 20 KHz span], usually on 80 meters from the 
>> previous night.  The K3 receiver, up to the ADC I think, is still 
>> operating in TERM mode, and I can see signals in that range.  The P3 
>> is what I look at 99.5% of the time and I miss it when running 
>> remote.  The only option I would have now is about 60 km of RG-58 to 
>> bring the 1st IF down to my P3. [:-))
> ---------------------------------------------------------------------------
> Bill Frantz        | Re: Computer reliability, performance, and security:
> 408-356-8506       | The guy who *is* wearing a parachute is *not* the
> www.pwpconsult.com | first to reach the ground.  - Terence Kelly
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kx3.1 at coldrockshotbrooms.com
>