[Elecraft] K3 Receiver mush

[Mike Cox]

If CONFIG:PB CTRL is set to .01 in CW mode, then, per the function 
description in the K3 Owners Manual (pp. 62 in Manual Revision A1), you 
will be limited to the Shift/Width controls mode only. Change PB CTRL to 
.05 and you will also enable LO/HI cut on the controls.

73,
Mike
> On 2/26/2017 10:13 AM, Ted Bryant wrote:
>> In playing with Bob N6TV's suggested settings, I've discovered that on CW,
>> neither the Shift->LO Cut nor the Width->HI Cut controls change functions
>> when tapped.  They appear fixed at SHIFT and WIDTH.  Tapping them merely
>> displays their current setting.  On SSB, they change and work as expected.
>> Is there a parameter setting somewhere that affects this?  I've looked
>> through the release notes but see nothing.
>>
>> Using the latest firmware: 5.57
>>
>> 73, Ted W4NZ
>>
>>