[Elecraft] Sub-RX no signals

[Chuck Chandler]

Never mind...

Walked back through the setup and realized I hadn't set the installed SubRX
filters on all modes... just CW.

All seems fine with the SubRX now.

73 de Chuck, WS1L

On Sun, Feb 26, 2017 at 9:50 AM, Chuck Chandler <chandlerusm at gmail.com>
wrote:

> Well, the Sub receiver was installed this morning, filters and config
> seemed to complete without problem.
>
> However, the Sub-RX does not seem to be getting any signals.  I see the
> Ant=Main when I use B-Set, so it should be sharing the main antenna.
>
> Any suggestions?  Nothing pops out on the CONFIG list, and I had three TMP
> cables plugged into the SubRX module, there were only 3 jacks I saw.  There
> were no unplugged ends inside the case.  There was one leftover TMP
> cable... I thought it was for the 144 module I don't have.  I may have to
> open it up and re-check all the TMP cables.  Unless it's a simpler fix.
>
> 73 de Chuck, WS1L
>
> --
>
>
> ===================
> Chuck Chandler
> chandlerusm at gmail.com
> ===================
>



-- 


===================
Chuck Chandler
chandlerusm at gmail.com
===================