[Elecraft] K3 Remoterig K3/0 MIC connection

[John Langdon]

When the K3/0 is connected to the K3, the rP or Fp menu sets the condition
of the K3, not the K3/0.
When the K3/0 is not connected, the setting changes the K3/0.
But I have had much better luck with connecting directly to the mic input om
the RRC control, so try that if you can.

73 John N5CQ


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of LA7NO
Sent: Sunday, February 26, 2017 9:38 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Remoterig K3/0 MIC connection

I just found tha there is a comment on the K3 mic setting on the top of p.16
in the K3 Remote manual.
I have now changed my setting for K3 to "rPL". Not sure if it should have
been "rPH".

Does the setting of the K3/0 have any influence when in remote  mode?
I find it a bit confusing that there apparently are two menu settings for
the K3/0:
one while disconnected from Remoterig and another while connected through to
K3.

P-T





--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Remoterig-K3-0-MIC-connection-tp7627
375p7627379.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to jlangdon1 at austin.rr.com