[Elecraft] Product Idea - 25 Watt PA for the K3

Eric Swartz - WA6HHQ, Elecraft eric at elecraft.com
Thu Feb 23 13:07:48 EST 2017


That is correct. While typically in the 25-35 W range, It can require up to the 
low 40 W range in some cases.

Eric
/elecraft.com/

On 2/23/2017 6:59 AM, Jim Miller wrote:
> And 25w isn't sufficient to drive the KPA to full power on all bands.
>
> jim ab3cv
>
> On Thu, Feb 23, 2017 at 9:53 AM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>
>> John,
>>
>> Historically, Elecraft has always offered options - on the premise that
>> "if you don't need/want it, you don't have to buy it".
>> As a result, the KPA3, KAT3, Bandpass filters for general coverage, 2nd
>> receiver, DVR, extra roofing filters are optional.
>>
>> For instance, those who want a transceiver only to drive VHF/UHF
>> transceivers do not want to buy the 100 watt PA, nor the KAT3.  Those who
>> operate only QRP levels can pay for a K3S without the KPA3.
>>
>> Certainly, it makes customizing your order a bit more involved, but you
>> end up with a transceiver that is tailored to your needs and operating
>> preferences.
>>
>> 73,
>> Don W3FPR
>>
>> On 2/23/2017 9:32 AM, john at kk9a.com wrote:
>>
>>> I am a little late to the Elecraft party, why does this transceiver use a
>>> separate 100 watt module instead of just having a 100 to 200 watt
>>> transmitter like other manufactures?
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jim at jtmiller.com
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swartz at elecraft.com



More information about the Elecraft mailing list