[Elecraft] KX2 internal speaker

[Brendon Whateley]

If it is similar to the KX3, where the connector on the speaker can be
fitted backward... you might want to try turning it around.

Regards,
- Brendon
KK6AYI

On Fri, Feb 17, 2017 at 9:48 AM, Hajo Dezelski <dl1sdz at gmail.com> wrote:

> Hi,
>
> I have the same problem. The sound stops even during operation and I
> have to fiddle with the speaker wires to get it working again. The
> sound via the headphones is not interupted.
>
> 73 de Hajo dl1sdz
> Gruss
> Hajo
>
> ---
> Cela est bien dit, mais il faut cultiver notre jardin.
>
> http://hajos-kontrapunkte.blogspot.de/
>
>
> On Fri, Feb 17, 2017 at 6:23 PM, AE0MM via Elecraft
> <elecraft at mailman.qth.net> wrote:
> > I thought I read something about this recently, but I can't find the
> thread in the Elecraft nabble archives.
> >
> > Frequently when I power-on my KX2, the internal speaker is dead. To get
> it working again, I remove the internal battery, jiggle the speaker wires,
> replace the internal battery and back of the rig, power it up, and the
> speaker works again. I can't see any worn spots in the insulation of the
> speaker wire.
> >
> > What should I check next?
> >
> > Thanks,
> >
> >
> > --ae0mm
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to dl1sdz at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to brendon at whateley.com
>