[Elecraft] High SWR/Low Power out on K3S

[Don Wilhelm]

Dean,

It sounds like you have an intermittent connection somewhere.  Contact 
K3support for the best analysis.

73,
Don W3FPR

On 2/16/2017 8:02 PM, Dean Blair wrote:
> Hi,
>
> Just curious if others had this issue and could resolve it.
>
> My K3S had suddenly started showing High SWR faults with resulting low power out due to rollback even when the autotune reads 1.0-1.  Different dummy loads, antennas, and coax jumpers change nothing.  I upgraded the firmware to the most current release and still no change.
>