[Elecraft] K2 IF output

[lmarion]

The Cliffton Webb unit was specifically made for K2 exact signal/clean easy 
physical fit internally,
and a external  IF pass band filter for a clean signal no matter what kind 
of signals
are present in your shack.
Not a area of your receiver where you want to be hacking about. Just saying.

73  Leroy  AB7CE


-----Original Message----- 
From: Heinz Bärtschi
Sent: Monday, February 13, 2017 11:22 AM
To: Ken G Kopp
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K2 IF output

That would be an option:

IF Adapter full kit (SMD components):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapter

IF Adapter kit (all SMD components soldered):
http://www.qrp-shop.biz/epages/qrp-shop.sf/de_DE/?ObjectPath=/Shops/qrp-shop/Products/Vk2zfadapterBestückt

73, Heinz HB9BCB


> Am 13.02.2017 um 18:43 schrieb Ken G Kopp <kengkopp at gmail.com>:
>
> Who makes a Clifton Labs Z1000B replacement for the K2?
>
>> On Feb 13, 2017 07:46, "Don Wilhelm" <donwilh at embarqmail.com> wrote:
>>
>> Ken,
>>
>> Sorry, but I do not.
>> There is a ham in England who produces a buffer amplifier that can be
>> used, but I cannot recall who.
>> If you ask on the reflector for a Clifton Labs Z10000B replacement, you
>> may get some hits.
>>
>> 73,
>> Don W3FPR
>>>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lmarion at mt.net