[Elecraft] KX3/PX3/KXPA100 - PX3 taking 5 minutes to come on??? KXPA100 loses mind...

[Dick Dievendorff]

If the kxpa100 power slide switch is OFF, the amp depends on periodic polls from the kx3 to keep it on.

Dick, K6KR

> On Feb 12, 2017, at 14:39, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Jack,
> 
> It would seem that you have tackled the most obvious stuff.
> I don't know whether you have a bad display or not, so I suggest you contact K3support to see if they might have seen a problem like that.
> 
> I have heard about prior problems with PA MODE turning off, but I don't recall what is to be done about it.  A fault in the KXPA100 can cause it, and the support folks may want a fault report from KXPA100 Utility.
> 
> 73,
> Don W3FPR
> 
>> On 2/12/2017 1:51 PM, Jack Spitznagel wrote:
>> All, (particularly Don or one of the kind folks at Elecraft support)
>> 
>> There are two seemingly interrelated problems in this message that may
>> indeed be independent.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com