[Elecraft] Multiple radios with KAT500/KPA combo

[Harry Yingst]

I wonder if you could just use diodes





      From: Richard Lawn <rjlawn at gmail.com>
 To: elecraft at mailman.qth.net 
 Sent: Friday, February 10, 2017 10:00 PM
 Subject: [Elecraft] Multiple radios with KAT500/KPA combo
   
I have a setup with 4 different radios on the bench and I'd like to use
them all with my KAT500 and KPA500. One of the radios is a K3. The others
of course all have PTT outputs. I suppose there is no way to do this short
of making a switch box with all PTT lines from the 4 radios and a single
output to the PTT in on the KPA500. If I'm missing a possibility please let
me know.

73
Rick, W2JAZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyingst at yahoo.com