[Elecraft] USB devices disabled?

[Brendon Whateley]

Specifically the error means that something plugged into the USB ports of
the computer is exceeding the amount of power it should be drawing. There
could be several reasons, including a short in the USB cable or a device
that doesn't follow the protocol for getting more power from the port.

Unplug everything and work your way back until you find the culprit.

Good luck,
- Brendon
KK6AYI

On Thu, Feb 9, 2017 at 7:01 PM, PHILIP GRAITCER <pgraitc at me.com> wrote:

> I’ve just had the KIO3B USB interface installed on my K3. When I plug it
> into my Mac Mini I get the following message: “USB DEVICES DISABLED -
> Unplug device using too much power to re-enable USB devices”. What does
> this mean? I am unable to connect my logging program, MacLoggerDX.
>
> THanks,
> Phil, W3HZZ
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to brendon at whateley.com
>