[Elecraft] Voice recorder programming

[Don Wilhelm]

Pete,

That would depend on the software you have running on the computer and 
its use of the computer keyboard F-keys.

If you can send a command from your software to the K3, then the answer 
is YES.  Look in the K3 Programmer's Reference.  You should see the "nn" 
codes for the K3 buttons.  SWTnn is a tap, and SWHnn is a hold.
In other words, to send a command to tap the M1 button, the computer 
needs to send SWT21; to the K3.

73,
Don W3FPR

On 2/6/2017 5:05 PM, Pete Gladysz via Elecraft wrote:
> Is there a way to program the K3 to send the voice messages stored in M1,
> M2, M3 and M4 by using the F key functions on the computer keyboard?
>