[Elecraft] Failure to Load Drivers for K3 & KAT500

[tomb18]

HiThe first thing I would do is to uninstall any drivers for serial ports you have on your system using the device manager. In the process, you will see a check box to delete the driver. Select this.Reboot. Next download the ftdi drivers and do the install of the driver software. Then, plug in the USB to serial adapters and let windows do its thing. After this, go into the device manager,  select the unknown or serial device and install the driver, pointing to the folder containing the driver from ftdi.If this doesn't work, you may have hidden devices. To determine what they are search in Google for uninstall hidden devices. Follow that and repeat.That should do the trick.73 Tom 


Sent from my Samsung Galaxy smartphone.
-------- Original message --------From: Richard Lawn <rjlawn at gmail.com> Date: 2017-02-04  10:35 PM  (GMT-05:00) To: elecraft at mailman.qth.net Subject: [Elecraft] Failure to Load Drivers for K3 & KAT500 
I recently got my K3 back from the shop. In the interim I had other radios
to use. When I plugged the USB cables from both the KAT500 and K3 neither
were recognized by the computer running Win 7 and drivers would not install
after going through the usual process. The computer is acting like there
were never any FTDI drivers and of course there were as I used the K3, KX3
and a USB8 relay board that uses the same driver. Anyone else experience
this problem or have any suggested solutions?

73
Rick, W2JAZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tomb18 at videotron.ca