[Elecraft] k3 ALC problem

[Don Wilhelm]

The folks at K3support may have some information for you.

73,
Don W3FPR

On 1/31/2017 4:57 AM, erz.gebirge wrote:
> My K3, S/N 7834 and has the newest
>
> Softwareupdate. Power calibration with K3 Utility was enforced.No problem!
>
> TX ALC ON. TECH MD OFF. External watt-meter LP100A.
>
> Problem:
>
> Power out adjust on 30 watts.
>
> issue 1- The meter displayed 100 ..140 watts with the first dot.
>
>              Then, the power out goes back to 30 watts. In approximately
> 300…500ms.
>