[Elecraft] 80 meters

[Barthold Lichtenbelt]

➢ and 3- reran the K3 Power Cal procedure with the K3 Utility.

Yes, great advice. Definitely do this.

73,
Barthold


From: Brian Hunt
Sent: Saturday, December 30, 2017 9:49 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] 80 meters

I had a similar problem on the low bands. I did three things:  1- Replaced the stock power cord with ~4 ft of #10 twisted pair cable; 2- Turned up the no-load voltage on the Actron linear supply to 14.2 v which gives me better than 13.5v @ 100w key down on the K3 display and 3- reran the K3 Power Cal procedure with the K3 Utility. It's been fine ever since.  GL+HNY

73,
Brian, K0DTJ

> On Dec 30, 2017, at 18:51, Mal Speer <malco at carolina.rr.com> wrote:
> 
> I seem to have low output on 75 phone. The most power I can put out is 71
> watts. I can turn the power knob to 100 watts, but it backs down to 71
> immediately. This is into an antenna and a dummy load.
> 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to bartholdl at yahoo.com