[Elecraft] KX3

[Mark Gebhardt]

The RX EQ highest octave can be adjusted down to the lowest level to get
rid of hiss. The best change to make is turn the RF gain to -10 or  -15 to
get rid of the noise. Turn off the preamp. Those changes will make for the
best listening experience.

Wayne has squelch for HF on the list as of the last Hamvention.

Mark

K9ZQ



Date: Wed, 27 Dec 2017 06:34:03 -0600
From: "kg9hfrank at gmail.com" <kg9hfrank at gmail.com>
To: elecraft at mailman.qth.net
Subject: [Elecraft] KX3 settings for 80SSB nighttime
Message-ID: <1B2F6D15-50B9-4218-B685-C9EF8D23CE44 at gmail.com>
Content-Type: text/plain; charset=us-ascii

Folks I have had a KX3 for years and used it mostly on CW (ok.. 95%).
With my rotator cuff surgery, I am up most of the night and listen on 75SSB.

I see NR, and of course PBT I/II as well as the RX EQ.  It dawned on me
that I have never adjusted any of them.
Of note is PBT I/II where I am not getting full advantage of the optional
filter.

The background noise at my QTH seems to be mostly atmospheric and S-5.  Any
preliminary set-up that I can follow?

de KG9H