[Elecraft] KX2 CW tx decode for code practicing using external straight key

[Bjorn Pehrson]

Tnx for info and tip Wayne. Will try.

Bjorn/sa0bxi


On 2017-12-27 19:05, Wayne Burdick wrote:
> Sorry, Bjorn, transmit text decode only works with the internal keyer.
>
> There is another way. You could build a simple crystal oscillator that puts out a weak signal somewhere in the KX2’s receive tuning range. Once you tune into that signal, the decoder could track your CW regardless of how you send it. I believe it will go down to about 8 WPM. You’ll need to experiment with the decoder’s RX THR setting.
>
> 73,
> Wayne
> N6KR
>
> ----
> http://www.elecraft.com
>
>> On Dec 27, 2017, at 9:35 AM, Bjorn Pehrson <bpehrson at kth.se> wrote:
>>
>> Dear all,
>>
>> I am trying to understand if it is possible to get a kx2 decode cw tx for code practising purposes if using a straight key.
>> I get everything working nicely using the internal paddle but I cannot get it working with an external straight key connected to the 3.5mm key contact.
>>
>> I do manage to get the monitoring side tone but I get no decoding.
>>
>> Anyone knows if this soukld be possible and how?
>>
>> Bjorn/sa0bxi
>> .
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n6kr at elecraft.com
> .
>