[Elecraft] KX2 CW tx decode for code practicing using external straight key

[Wayne Burdick]

Sorry, Bjorn, transmit text decode only works with the internal keyer. 

There is another way. You could build a simple crystal oscillator that puts out a weak signal somewhere in the KX2’s receive tuning range. Once you tune into that signal, the decoder could track your CW regardless of how you send it. I believe it will go down to about 8 WPM. You’ll need to experiment with the decoder’s RX THR setting. 

73,
Wayne 
N6KR

----
http://www.elecraft.com

> On Dec 27, 2017, at 9:35 AM, Bjorn Pehrson <bpehrson at kth.se> wrote:
> 
> Dear all,
> 
> I am trying to understand if it is possible to get a kx2 decode cw tx for code practising purposes if using a straight key.
> I get everything working nicely using the internal paddle but I cannot get it working with an external straight key connected to the 3.5mm key contact.
> 
> I do manage to get the monitoring side tone but I get no decoding.
> 
> Anyone knows if this soukld be possible and how?
> 
> Bjorn/sa0bxi
> .
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com