[Elecraft] Question on K3 (upgraded) and FT8 setup

[Joe Subich, W4TV]

 > It was item #1. Ironically my Microkeyer II was plugged into "line in"

You could certainly have configured WSJT-X to use your MK II by
following the example in:
    <http://www.microham.com/Downloads/MK2_WSJT-X_Setup.pdf>

Connecting any plug to the KIO3B "Line In" jack disconnects the output
from the sound card on the KIO3B board.

73,

    ... Joe, W4TV


On 12/22/2017 8:19 AM, n1ix at n1ix.com wrote:
> Thanks Joe!
> It was item #1. Ironically my Microkeyer II was plugged into "line in"
> I would have lost some more hair (that I don't have) finding that one.
> Thanks
> Dave N1IX
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Joe Subich, W4TV
> Sent: Friday, December 22, 2017 6:59 AM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Question on K3 (upgraded) and FT8 setup
> 
> 
>   > I set up the WSTJ software and K3 by following K8ZT's procedure  >
> https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLPqw2LDG
> 8kM/edit#
> 
> The document does not exist.  Have you:
> 
> 1) made sure there is no plug connected to the KIO3B "Line In" jack?
> 2) selected DATA | DATA A mode?
> 3) selected MENU:MIC SEL = Line Lin
> 4) Adjusted the mic gain for 4 to 5 bars of ALC *AFTER* setting
>      MENU:MIC SEL = Line In?
> 5) Confirmed that WSJT-X Soundcard Output is set to "Speaker (USB
>      Audio CODEC) that represents the KIO3B sound card?
> 6) Confirmed that the Windows Audio Mixer controls for "Speaker
>      (USB Audio CODEC) that represents the KIO3B sound card is not
>      muted?
> 
> 73,
> 
>      ... Joe, W4TV
> 
> 
> On 12/22/2017 6:40 AM, n1ix at n1ix.com wrote:
>> I have a K3 that I've upgraded to a K3S with the synthesizers and the
>> KIO3B kit.
>>
>> I set up the WSTJ software and K3 by following K8ZT's procedure
>> https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLP
>> qw2LDG
>> 8kM/edit#
>>
>> Receive works great but when I try to transmit a tone using the "tune"
>> button on the WSTJ software I get the PTT signal of no tone (audio).
>> I have a feeling that there is a K3 menu that is not set correctly.
>>
>> Any suggestions would be appreciated.
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html Message delivered to
>> lists at subich.com
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to n1ix at n1ix.com
> 
>