[Elecraft] Question on K3 (upgraded) and FT8 setup

[Joe Subich, W4TV]

 > I set up the WSTJ software and K3 by following K8ZT's procedure
 > 
https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLPqw2LDG8kM/edit#

The document does not exist.  Have you:

1) made sure there is no plug connected to the KIO3B "Line In" jack?
2) selected DATA | DATA A mode?
3) selected MENU:MIC SEL = Line Lin
4) Adjusted the mic gain for 4 to 5 bars of ALC *AFTER* setting
    MENU:MIC SEL = Line In?
5) Confirmed that WSJT-X Soundcard Output is set to "Speaker (USB
    Audio CODEC) that represents the KIO3B sound card?
6) Confirmed that the Windows Audio Mixer controls for "Speaker
    (USB Audio CODEC) that represents the KIO3B sound card is not
    muted?

73,

    ... Joe, W4TV


On 12/22/2017 6:40 AM, n1ix at n1ix.com wrote:
> I have a K3 that I've upgraded to a K3S with the synthesizers and the KIO3B
> kit.
> 
> I set up the WSTJ software and K3 by following K8ZT's procedure
> https://docs.google.com/document/d/1-yBKo9Fr1NmwG4AaV0jiI6LbtiMysYGVLPqw2LDG
> 8kM/edit#
> 
> Receive works great but when I try to transmit a tone using the "tune"
> button on the WSTJ software I get the PTT signal of no tone (audio).
> I have a feeling that there is a K3 menu that is not set correctly.
> 
> Any suggestions would be appreciated.
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>