[Elecraft] VFO B / Decode

[Bob Novas]

I have the same complaint about time, when displaying time in VFO B - it toggles between time and frequency. I'd like it to stick to what I set it to! Bob W3DK

-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of zachary petersen
Sent: Friday, December 08, 2017 12:21 PM
To: Nr4c; Cady, Fred; elecraft at mailman.qth.net
Subject: Re: [Elecraft] VFO B / Decode

Bill,
Thanks for responding. What I am mainly referring to is the fact that it switches from decode back to the frequency. I would like it to stay on decode 100%. Is that possible?

On Fri, Dec 8, 2017 at 9:13 AM, Nr4c <nr4c at widomaker.com> wrote:

> You’re not the first person to request that we have a choice of Decode 
> OR Frequency in VFO B window.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Dec 8, 2017, at 11:51 AM, zachary petersen 
> > <petersen.zac at gmail.com>
> wrote:
> >
> > Fred,
> > I have a KX3 I thought this mailing list was specific to KX3. I did
> however
> > try the K3 Utility to see if the terminal would output the decoded 
> > text however that didn't work. Additionally while in the field you 
> > can't /
> don't
> > always have a computer availble for you to decode the text you are
> sending,
> > or something that was said a few minutes before.
> >
> >
> >> On Tue, Dec 5, 2017 at 11:49 PM, Cady, Fred <fcady at montana.edu> wrote:
> >>
> >> Hi Zac,
> >>
> >> You can use the K3  Utility program and its Terminal window to show 
> >> the decoded characters when you have decode turned on.  You can 
> >> operate CW, RTTY (FSK D) and PSK (PSK D).  You can define 16 
> >> memories for each of
> the
> >> modes by clicking * Edit Memories*.
> >>
> >> Cheers and 73,
> >>
> >> Fred KE7X
> >>
> >>
> >> For info on all KE7X Elecraft books, see www.ke7x.com.
> >>
> >>
> >> ------------------------------
> >> *From:* elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.
> net>
> >> on behalf of zachary petersen <petersen.zac at gmail.com>
> >> *Sent:* Tuesday, December 5, 2017 11:57 PM
> >> *To:* elecraft at mailman.qth.net
> >> *Subject:* [Elecraft] VFO B / Decode
> >>
> >> I have been looking through the options, and the manual however I 
> >> can't seem to find an option to force VFO B to stay on decode 
> >> instead of switching back to the frequency. I have been using 0 PWR 
> >> and the decode
> to
> >> practice CW however since VFO B switches back it makes it difficult 
> >> to
> see
> >> what I have typed unless I am actively looking at it.
> >>
> >> Additionally I thought it might be interesting to allow for VFO B 
> >> knob while on "decode" mode to allow you to scroll back in a 
> >> conversation (
> to a
>
>


--
--Zac
858-888-6090 <(858)%20888-6090>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to bob.novas at verizon.net