[Elecraft] K3 suffers from amnesia
Cady, Fred
fcady at montana.edu
Mon Dec 4 11:26:02 EST 2017
The K3s does this to avoid the extraneous keying due to activity on the USB serial port while the computer is booting up. You can put the K3s into USB.SAFE mode like this:
"Safe" mode disables PTT or keying transmissions until the K3S receives a command via the USB interface, such as a read of the rig's VFO frequency. To turn on safe mode, go into CONFIG:PTT-KEY and tap 1 to select USB.SAFE. Exit the menu and turn the radio off/on. Applications that use PTT-KEY but don't send commands will require UNSAFE mode (the default). In this case, be sure to turn the PC on before the K3S.
Cheers and 73,
Fred KE7X
For info on all KE7X Elecraft books, see www.ke7x.com
________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Udo Langenohl - DK5YA <dk5ya at dk5ya.de>
Sent: Monday, December 4, 2017 9:11 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 suffers from amnesia
I pimped both of my K3 with the new KIO3B boards in order to avoid that
nasty sound card cabeling etc. It works fine via USB but one strange
thing happens with both radios.
I have to set "PTT-KEY" to RTS-DTR every time after powering down and
power up the radio again. Both K3 forget the setting "RTS-DTR" each and
every time. No matter what the computer or the operating system is,
RTS-DTR always switches to "OFF-OFF" when the radio goes OFF. What am I
doing wrong?
73 Udo, DK5YA
--
******************************************
Webs by DK5YA: *
http://www.mmmonvhf.de/ [editor]*
http://www.vhfdx.de/ [owner] *
******************************************
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu
More information about the Elecraft
mailing list