[Elecraft] AUX port gender on KPA1500 different than KPA500

[Dick Dievendorff]

Dan: 

The initial prototypes used for photos did have a male DE-15.  That was
changed in a subsequent prototype revision.  The KPA1500 prototype here has
a male DE-15 AUX connector, just like my KPA500.

The K3/K3S to KPA1500 15-pin ACC cable is the same as the cable for KPA500.

The KPAK3AUX cable set includes a Y cable expansion adapter and a TX keying
line interrupter (see KPAK3AUX in the KPA1500 section of our product list),
or the 15-pin cable can be ordered separately without the Y and TX key line
interrupter, see the KAT500 section of our order page, P/N E850463.

73 de Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Dan AE9K
Sent: Saturday, December 2, 2017 20:26
To: elecraft at mailman.qth.net
Subject: [Elecraft] AUX port gender on KPA1500 different than KPA500

The picture of back of the RF deck on the KPA1500 FAQ shows a female DE-15
for the AUX port.  The KPA500 has a male DE-15 AUX port.  Is the port in the
picture correct or just a pre-production mock-up with the wrong gender?  

I ask because I'm inserting a switch box and am making the associated cables
to be able to flip back and forth between the two amps (when the KPA1500
arrives).

Dan
AE9K




--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dick at elecraft.com