[Elecraft] K3S New Builder (Tom NB5Q)

[Don Wilhelm]

Tom,

The best advice I can offer is to:
- follow the instructions as written, they are correct.
- Make certain you use the correct screw lengths (measure them if 
necessary).
- Do not jump around in the instructions, the order presented is for a 
purpose.  Start at the beginning and work to completion.
- Work on one kit at a time.  Start with the K3S and all its options, 
then when working, start on the P3.  Connect them together as shown in 
the Owner's manual(s).

73,
Don W3FPR

On 12/1/2017 11:11 PM, Tom Norris wrote:
> My first post, new builder, old man (74 years young!). I've been inactive
> for some time but looking forward to getting back on CW with the new K3S,
> P3 kits. I'm sure I will be back here for your valued and experienced
> assistance during the build and setup. I have searched for and read a lot
> of the posts on the list pertaining to assembling Elecraft kits. Thank you
> and I hope to use a lot of the information in those posts. If you have any
> up front advice in the assembly or setup of the following parts, I hope you
> will share it with me.