[Elecraft] Power source for KAT500

[Ken K6MR]

Assuming it is in the vicinity of the K3, use the station power supply.  If it’s somewhere else, just about any wall wart will work.  Spec is 200 mA typ., 1.0A max.

Ken K6MR

From: Sid Frissell<mailto:sidfrissell at gmail.com>
Sent: Wednesday, August 23, 2017 20:46
To: Elecraft at mailman.qth.net<mailto:Elecraft at mailman.qth.net>
Subject: [Elecraft] Power source for KAT500

Just got my new KAT/KPA500 on the August Special.  I have both units all wired, tested and ready to go except for the 12 to 15 VDC power connection for the KAT500.  What are you experienced KAT/KPA owners using for this power source?  What amperage is required?  Advice would be appreciated, please.

Sid. NZ7M

Sent From Sid Frissell's iPad
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6mr at outlook.com