[Elecraft] BL2 Enclosure

[Thorpe, Jeffrey]

You can also use a short section of 2" PVC with a couple end-caps that have proper sized holes drilled for your wire.

Jeff - KG7HDZ

> On Aug 22, 2017, at 7:27 PM, Brian Hunt <huntinhmb at coastside.net> wrote:
> 
> Links are at the bottom of the Elecraft main page. Here's link to the BL2 case. 
> http://www.w8fgu.com/bl2encl.html
> 
> Brian, K0DTJ
> 
>> On Aug 22, 2017, at 21:13, James Bennett <w6jhb at me.com> wrote:
>> 
>> Just completed the assembly of the Elecraft BL2 balun. Nice unit, but I'm a tad disappointed that there is no enclosure for it, optional or included. Since there are exposed electronic connections on it, and because I'll be connecting it to 450-ohm ladder line that handles line barbed wire, I hate just having the BL2 flopping around.
>> 
>> A buddy of mine mentioned that he thought at one time there was someone on this reflector who was offering an enclosure for the BL2. Does anyone here have information on such an item? Or, has anyone here with a 3D printer attempted building one?
>> 
>> Thx, 
>> 
>> Jim Bennett / W6JHB
>> Folsom, CA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jthorpe at liberty.edu